Six Layouts.
Two Cabins.
Ready to Deploy.
When time is critical, Hardwear delivers. Our standard models are off-the-shelf onsite solutions, built to full mine compliance and ready for immediate deployment. Choose a 7.7 m or 9.0 m cabin in a Crib, Lunch or Office layout, fitted out for construction, mining, civil and infrastructure projects.
Every standard model, fully fitted.
All six layouts share the same chassis, power, plumbing and safety systems. Only the fit-out changes.
Power & technology
- 48V Victron solar package: 4× 50Ah Li batteries, 6× 440W solar panels
- 6kVA diesel back-up generator (battery charge only)
- In-cabin remote generator control
- Starlink enabled
- 3× double GPOs and 1× USB/USB-C outlet
- Digital tank & power display
- 15A inlet
- Narva autoelectrics: vehicle lights, side markers & reflectors
- Reversing alarm
Chassis
- AL-KO charcoal post-painted Duragal dual axle chassis
- Enduro cross-country independent suspension
- Electric brakes to all wheels
- Pintle ring tow hitch, safety chains & jack stand
- 4× corner stabiliser legs
- Tie-down points
- Rubber mudflaps
Wheels & tyres
- 235/75R-15 wheels & tyres
- Spare wheel
- Wheel nut indicators
Plumbing
- 400L potable water storage
- 650L waste tank
- 2× stainless steel basins and stainless steel sink
- Mixer taps on all basins & sink
- 2× dual flush toilets, 3 Star WELS
Appliances
- 2kW Midea reverse cycle air conditioner
- 202L fridge/freezer
- 700W 20L microwave
- 3L instant hot water unit
Doors & windows
- Doors with lockable handles, keyed alike
- Double service hatch doors
- Lockboxes on main cabin and service hatch doors
- Sliding windows with security mesh
- Custom-made aluminium fold-out stairs with fold-out handrails
Internal fixtures
- Built-in bench seating with under-seat storage
- Removable table
- Document box with hardcopy operator’s manual (if required)
- Roll-style hand towel dispensers, 2L liquid soap dispensers
- Stainless steel toilet roll holders
External fixtures
- 20ft / 6m awning spanning all doors
- Awning rollers & support cradle
- Cabin hooks on main cabin and service hatch doors
- Sprung door chains
Body & flooring
- Surfmist EPS sandwich panel: 75mm walls (R2), 100mm roof (R3), 50mm floor
- Floor layered with 15mm marine plywood
- Camden Grey Accolade Plus vinyl with 100mm coving
- Checkerplate and reflective tape wrap-around
Safety
- 2× 4.5kg fire extinguishers (draw bar and generator hatch)
- 9V smoke alarm in main cabin
- 2× external emergency stops
- 2× urethane wheel chocks on a secure holder
Compliant with electrical safety standard AS/NZS 3001.2 and all required Australian Design Rules (ADRs).
Download our
spec sheet
In a time where we’re seeing a fuel crisis across the country and the price of diesel soaring, every hour that a diesel generator runs, it is now costing the user significantly more money.
Most site vans still rely on this setup - generators constantly running to support power needs and we’re proud to say Hardwear vans don’t.
As every Hardwear van leaves our workshop it does so with a fully integrated 48V solar package, with a generator purely as a backup, not something you rely on constantly. This is standard for our vans.
But its not just solar. Every van comes fully equipped with the essentials - from power, water and safety systems to work-ready interiors and being Starlink ready - you can hit the ground running. With fast turnaround times, branding options and the reliability Hardwear is known for, our standard range gives you practical, compliant facilities without the wait.
That's where the Hardwear difference shows.
Not all Vans are
made the same.
Your standard or customised
onsite vans.
Our full range of standard onsite vans are ready to go with fast turnaround - designed, built and compliant for immediate deployment. These models cover the essentials, from site offices and accommodation to lunchrooms, medical units and command centres.
For projects that require something different, we also provide custom fitouts and tailored solutions. From adjusting floorplans to delivering specialised units or scalable fleets, our team engineers every build for durability, compliance and performance in the toughest environments.
The best way to determine what will keep your project moving is to talk to us. With decades of hands-on experience, we’ll help match you to the right solution, whether it’s one of our proven standard models or a customised build designed specifically for your site.
State of the Art Manufacturing
Every Hardwear van is manufactured in our state-of-the-art facility in Pakenham, Victoria. It’s here that design meets precision engineering - from the first frame through to the final fitout. Our factory is purpose-built for efficiency, safety and quality control, with ISO-accredited processes ensuring consistency across every build.
Being based locally means we keep a close eye on every stage of production and can adapt quickly to project needs. It also means faster turnaround times, tighter quality assurance, and the ability to customise without compromise.